![]() ![]() Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on the same network subnet. To mount them, unplug and then reconnect them.ġ. USB drives are not mounted automatically after a firmware update. You will receive a message when the update is finished. Do not turn the unit off until the update is finished. Please consult your local technical support representative if you experience any problems caused by this firmware update. Remember to check back with our website in order to stay up to speed with the latest releases.- : Modified the drive check process that occurs at startup for the LS200 series LinkStations (but not for the LS210D models). With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade. ![]() So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps. Failing to perform a software update can cause serious malfunctions to the network storage. Upgrading the Network-Attached Storage (NAS) firmware can improve the system's overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.ĭue to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. When the update finishes, a message will be displayed. The info LED will blink during the update.Ĩ. Transferring and updating the firmware will start. Click "Update" and enter the LinkStation's admin password.ħ. Select the LinkStation to update if multiple LinkStation are connected.ĥ. When a LinkStation is detected, an update window will open.Ĥ. Extract the downloaded file and run ""LSUpdater.exe". Also, stop or exit any firewall software.ģ. Then they will be on the same subnet and the updater will work properly.Ģ. In this case, reconfigure the LinkStation's IP address and subnet mask to Then the updater will _not_ work properly. The last number of the IP addresses should be different.įor example, if the IP address and subnet mask of the computer areĪnd the IP address and subnet mask of the LinkStation are The subnet masks should be the same and the first three numbers of the IP addresses should be the same. : Modified to deal with a Samba programming vulnerability (CVE-2017-7494). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |